Panasonic ag-hpx300p Manuel D’Utilisation

1

Chapter

Maintenance

and
Inspections

Make sure you successively carry out the inspections from 
[Inspecting the P2 Card Recording] to [Inspecting the 
Earphone and Speaker].

Checkonthedisplayinsidetheviewfinderthat
theremainingPcardrecordingcapacityis
sufficient.

For details, refer to [Screen displays] (page 66).

Pressthecamera’sRECbuttontocheckthe
followingitems:

•  The P2 access LED blinks in orange.
• The REC indication in the viewfinder lights.
•  System warnings do not appear inside the 

viewfinder.

Pressthecamera’sRECbuttonagain.

•  Check that the P2 access LED lights orange and 

that REC indication in the viewfinder clears.

UsingtheRECbuttononthehandle,repeat
Stepstotocheckthesameoperation.

•  Check the VTR button on the lens in the same way.

PresstheTHUMBNAILbuttontoswitch
thethumbnailscreentoplaybackcurrently
recordedclipfromthumbnail.

• Check that playback is operating normally.

UsetheUSERbuttontowhichtheSLOTSEL
functionhasbeenassignedtoselectPcards
forrecordingwhenmorethanonePcardis
insertedinthecardslots.

•  Repeat the operations in Steps 2 to 3 and 5 

to check that recording and playback operate 
properly.

SettheAUDIOSELECTCH1andCH
switchesto[AUTO].

SettheAUDIOINswitchto[FRONT].

AimthemicrophoneconnectedtotheMICIN
jackatanappropriatesoundsource.Then,
checkthattheleveldisplaysforbothCH1and
CHchangeaccordingtothesoundlevel.

SettheAUDIOINswitchto[FRONT].

SettheAUDIOSELECTCH1andCH
switchesto[MAN].

TurntheAUDIOLEVELCH1andCHcontrols.

•  Check that the level display increases when the 

controls are turned to the right.

TurntheMONITORcontroltocheckthatthe
speakervolumechanges.

ConnectanearphonetothePHONESjack.

•  Check that the speaker is turned off and the 

microphone sound can be heard from the 
earphone.

TurntheMONITORcontroltocheckthatthe
earphonevolumechanges.