Panasonic ag-hpx300p Manuel D’Utilisation

Chapter

Adjustments

and
Settings

for

Recording

When operating the AG-HPX300P without a sound 
recordist, it is recommended that the FRONT AUDIO LEVEL 
control should be used to adjust the audio level.
In advance, check the level meter in the viewfinder screen 
and use the FRONT AUDIO LEVEL control to adjust the 
appropriate audio channel to prevent input of excessive 
audio signals.

Use the menu options FRONT VR CH1 and FRONT VR 
CH2 in the AUDIO SETUP screen to determine whether or 
not the FRONT AUDIO LEVEL control should be enabled. 
Selecting an input signal in the menu will enable FRONT 
AUDIO LEVEL control operations for that input signal.
•  When the FRONT AUDIO LEVEL control is set to level 10, 

it controls AUDIO LEVEL CH1 and CH2.

PUSH  MENU  TO  RETURN 

FRONT VR CH2

MIC LOWCUT CH1

MIC LOWCUT CH2

MIC LOWCUT CH3

MIC LOWCUT CH4

LIMITER CH1

OFF

OFF

OFF

OFF

OFF

LIMITER CH2

OFF

OFF

OFF

FRONT VR CH1

AUDIO SETUP

Conditions and input levels set in the menu options AUTO 
LEVEL CH3 and the AUTO LEVEL CH4 in the AUDIO 
SETUP screen change the operation of the audio level of 
channels 3 and 4 as shown below. These functions cannot 
be manually adjusted.
Each option can be selected in the AUDIO SETUP screen.

ON

AGC

 

* ON

AGC ON

OFF

AGC/LIMITER OFF

LIMITER ON

* AGC: Audio Gain Control