Panasonic ag-hpx300p Manuel D’Utilisation

Chapter

Adjustments

and
Settings

for

Recording

Use the setting menu UB MODE on the RECORDING 
SETUP screen to select the user bits to record in the 
subcode area.
•USER:

Records internal user values.
To set user values, set the TCG switch to SET to open 
the setting menu UB PRESET screen.
Set values are retained after the power is turned off.
See also [Entering the User Bits] (this page).

•TIME:

Records the time calculated by the internal clock.

•DATE:

Records the year, month and day time digits from the 
internal clock.

•EXT:

Records the user bits input to the TC IN connector.
Recording of 1394 input also records user bits input to 
the DVCPRO/DV connector.

•TCG:

Records the time code value.

•FRM.RATE:

Records the frame rate information of camera capture.
A native recorded clip is played back at the same frame 
rate as the VITC UB regardless of recorded values. Use 
this setting when a PC or other editing device is to use 
the user bit frame rate.
For details, see [Frame rate information recorded in 
user bits] (page 59).

•  To slave lock to the user bits input to the TC IN connector, 

set to EXT.

•  In slave mode, the UB indicator is highlighted.
•  A slave relationship, once started, continues even after 

input from the TC IN or DVCPRO/DV connector ends. 
Note that the following events release user bit slave 
status.

•  When a UB MODE option is set to something other than 

EXT.

•  When UB PRESET is performed
•  Switching to 1394 in the menu option REC SIGNAL in 

the SYSTEM SETUP screen.

•  Turning the power off.
The internal user value retains the slave values even after 
slave release.

The user bits allow information, including memos that use 
up to eight-digit hexadecimal numbers (date and time), to 
be recorded in the Subcode area.

SettheCOUNTERbuttontoUB.

PositiontheTCGswitchatSET.