Panasonic ag-hpx300p Manuel D’Utilisation

Chapter

Adjustments

and
Settings

for

Recording

The AG-HPX300P can display two zebra patterns.
Turning the ZEBRA switch on displays the zebra pattern 
set in the menu in the viewfinder and LCD monitor. A menu 
setting makes it possible to also display the zebra pattern 
on video output via the VIDEO OUT connector.

ZEBRAswitch

Use the DISPLAY SETUP screen to set the level of zebra 
pattern display.

ZEBRA1 
DETECT

50%…70%…109%

Sets the level of the 

right-leaning zebra 

pattern 1.

ZEBRA2 
DETECT

50%…85%…109%

Sets the level of the 

left-leaning zebra 

pattern 2.

ZEBRA2

ON, SPOT, OFF

Selects the ZEBRA2 

type.

Underlined values indicate factory defaults.
SPOT:  A video level between ZEBRA1 and ZEBRA2 

displays a zebra pattern.

SPOT

OFF

ON

109%

0%

Imagelevel

To display a zebra pattern on video output via the VIDEO 
OUT connector, make the required settings in the OUTPUT 
SEL screen.

OUTPUTSELscreen

VIDEO OUT

ZEBRA

ON:
Displays the zebra pattern 
shown on the LCD monitor 
and viewfinder of this 
camera also in video 
output via the VIDEO OUT 
connector.
OFF:
The zebra pattern is not 
displayed in video output 
from the VIDEO OUT 
connector.

Specifies 
whether or 
not the zebra 
pattern is 
superimposed 
on VIDEO OUT 
signals.