Panasonic ag-hpx300p Manuel D’Utilisation
Chapter
Adjustments
and
Settings
Settings
for
Recording
2
SelectSAVEandpresstheJOGdialbutton.
PUSH MENU TO RETURN
VFR
FRAME RATE
(SYNCHRO SCAN)
DETAIL LEVEL
V DETAIL LEVEL
DETAIL CORING
RETURN
LOAD
SAVE
INITIAL
0
CHROMA LEVEL
0
0
0
LOAD SAVE INIT
SCENE FILE
3
SelectYESandpresstheJOGdialbutton.
• To return to the menu level above, press the
MENU button.
YES
NO
SAVE ?
SCENE FILE
PUSH SET
• “PROCESSING” appears and the following
message is shown when all settings have been
completed.
completed.
SAVE
COMPLETED !
• After changing the scene file settings, to return to the
settings to the previously saved values, select LOAD in
step 2 and perform the operation described in step 3.
step 2 and perform the operation described in step 3.
• To return the scene file settings to their factory defaults,
select INITIAL in step 2 and perform the operation
described in step 3.
described in step 3.
• To save and read user file settings or return them to
their factory defaults, open the setting menu OTHER
FUNCTIONS screen and run USER FILE in the same way
as when handling scene files.
FUNCTIONS screen and run USER FILE in the same way
as when handling scene files.
Saving scene files and other
settings on SD memory cards
settings on SD memory cards
You can save up to four scene file settings or other settings
as files on an SD memory card, and you can also load
them from the card.
• Current scene file settings are automatically saved in the
as files on an SD memory card, and you can also load
them from the card.
• Current scene file settings are automatically saved in the
camera and written to an SD memory card. When data
has been read from an SD memory card, the current
settings are rewritten at the same time as the data saved
inside the unit.
has been read from an SD memory card, the current
settings are rewritten at the same time as the data saved
inside the unit.
• The data in all the scene files, F1 to F6, is rewritten.
Be sure to read [Handling SD memory cards] (page 81)
regarding SD memory handling.
regarding SD memory handling.
The following procedure shows how to save scene files.
1
Settheunit’sPOWERswitchtoON.
2
SelectthemenuoptionSCENEFILEinthe
CARDFUNCTIONSscreen,thenpressthe
JOGdialbutton.
CARDFUNCTIONSscreen,thenpressthe
JOGdialbutton.
For details on menu operation, refer to [Using the
menus] (page 120).
menus] (page 120).
3
SelectCHANGEandpresstheJOGdialbutton.
• Select the menu option USER FILE for other
settings.
PUSH MENU TO RETURN
USER FILE
SD CARD FORMAT
RETURN
CHANGE
>>>
SCENE FILE
CARD FUNCTIONS
4
Selectthefilenumber(1to)usingtheJOG
dialbutton.
dialbutton.
• Press the JOG dial button again to confirm the
setting.
PUSH MENU TO RETURN
READ
WRITE
FILE 1
FILE 2
FILE 3
FILE 4
1
>>>
>>>
NO FILE
NO FILE
TITLE RELOAD
>>>
NO FILE
NO FILE
FILE SELECT
SCENE FILE(SD CARD)