Panasonic ag-hpx300p Manuel D’Utilisation
0
Chapter
Prepar
ation
Adjusting the Lens Flange Back
If images are not clearly focused at both telephoto and
wide-angle positions during zoom operations, adjust the
flange back (distance from the lens mounting surface to the
image formation surface).
Once adjusted, the flange back does not need to be
re-adjusted as long as the same lens is mounted on the
camera.
wide-angle positions during zoom operations, adjust the
flange back (distance from the lens mounting surface to the
image formation surface).
Once adjusted, the flange back does not need to be
re-adjusted as long as the same lens is mounted on the
camera.
NOTE
Please also refer to the lens instruction manual for directions
on adjustment and locations of individual lens parts.
on adjustment and locations of individual lens parts.
1
Mountthelensonthecamera.
• Make sure you connect the lens cable.
2
Setthelensiristomanual,andfullyopenthe
iris.
iris.
Approximatelym
3
Placetheflangebackadjustmentchartabout
mfromthelensandadjustthelightingon
thecharttoobtainanappropriatevideooutput
level.
mfromthelensandadjustthelightingon
thecharttoobtainanappropriatevideooutput
level.
• If the video level is too high, use the filters or the
shutter.
4
LoosentheF.f(Flangefocus)ringclamping
screw.
screw.
NOTE
F.b (Flange back) may be indicated on some lenses.
5
Setthezoomringtothetelephotoposition,
eithermanuallyorbyelectricdrive.
eithermanuallyorbyelectricdrive.
6
Shoottheflangebackadjustmentchartand
turnthedistanceringtoadjustfocus.
turnthedistanceringtoadjustfocus.
7
Setthezoomringtothewide-angleposition
andturntheF.f(flangefocus)ringtoadjust
focus.
andturntheF.f(flangefocus)ringtoadjust
focus.
• Do not move the distance ring during focusing.
8
RepeatStepstountilthelensisinfocusat
boththetelephotoandwide-anglepositions.
boththetelephotoandwide-anglepositions.
9
FirmlytightentheF.fringclampingscrew.