Toshiba 8GHO44-88 Manuel D’Utilisation

 

37

 

 

 

The Intensive Recording Option allows you to increase the Pictures Per Second and the resolution of any camera 
recording using sensor activation. When the intensive recording is activated, the resolution of the remaining cameras is 
immediately reduced to 360x240 and the Pictures per second to a user specified level. This is done to guarantee that 
the Pictures Per Second and Resolution will be set correctly and not exceed the DVR limitation.  

 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 

 – Adjusts the Frame Rate for the Intensive Channel. 

 

– Adjusts the Resolution for the Intensive Channel. 

    

 – Adjusts the amount of time to hold the Intensive Recording active.  

 

– Adjusts the Frame Rates for the Non-intensive Channels (the channels will drop their 

current settings and be forced to use this setting)  
  

– This setting enables the association of Intensive Recording to sensors. 

 

–The DVR automatically adjusts the Non-Intensive Channels down to the 

system default. This setting cannot be changed.   

 

The Intensive Recording option is setup as an ‘All or Nothing’. This means that once enabled (associated with sensors), 
all cameras that are associated with sensors will activate the Intensive Recording. 
 
To activate the Intensive Recording option, follow these steps.  

 
1)  Inside Setup, select the camera you wish to use and then enable the appropriate sensor (See Section 4.2.3) you 

wish to associate to it. 

Figure 4.7.3 

Figure 4.7.3