Coleman X2 Manuel D’Utilisation

• 

Under certain conditions (cold weather, high  humidity, etc.) condensation will form on the inside surfaces of your tent. Condensation

is caused by water vapor from your breath, perspiration, or any wet clothing inside your tent. It is NOT LEAKAGE through the tent 
fabric. It can be minimized by removing wet clothing from your tent and by providing good ventilation through the tent.

• 

Never store tent, even for a short period of time, without 

drying it thoroughly and brushing off caked dirt. Do not pack 
stakes or poles inside your tent. Use separate storage bag.

• 

STAKES SHOULD BE REMOVED BY PULLING ON THE STAKE

ITSELF. NEVER PULL ON THE TENT FABRIC OR TENT STAKE
LOOP TO REMOVE STAKE.

• 

TENT POLES SHOULD NOT BE LEFT TELESCOPED TOGETHER 

DURING STORAGE.

3600 N. Hydraulic  •  Wichita, Kansas 67219 

1-800-835-3278  •  www.coleman.com

– Layout the tent. (illus. 4)
– Position the tent in under the Rainfly
– Starting at the back of the tent, clip the tent to the 

Rainfly in the corners and then the side. (illus. 6)

– Attach the top of the tent to underside of the 

Rainfly with toggle and loops.

– Optional ground cloth in vestibule can be removed 

or attached and clipped to the webbing at front of 
the Rainfly. (illus. 6)

– Stake out rainfly doors, keep rainfly taut. (illus. 6)
– Attach Guy Lines to Guy Wings on back and sides 

of the Rainfly and stake out. (illus.6).

illus. 4 
Tent positions
in under Rainfly

illus. 6
Completed tent 
with Rainfly. 

Tent toggles to loops 
on underside of Rainfly

illus. 5
Tent clips onto 
pole stake loop

PRINTED IN CHINA

Rev. 11/07

© 2006 The Coleman Company, Inc. All Rights Reserved.