DISH Network 138410 Manuel D’Utilisation

5. If you want to continue, select the 

option. The receiver now 

displays the 

 screen containing further 

instructions.

 

6. Aim both remotes at the receiver. Press one button at a time on your 

DISH Network remote, while pressing the button to be taught on the 
universal learning remote at the same time. Repeat this process for each 
button you want to be taught to the learning remote.

Note: Any button on the DISH Network remote that is not used with 

your DISH Network receiver, will not teach the universal learning 
remote.

7. You can quit the teaching mode at any time by either of the two 

following methods:

•

Press any front panel button on your receiver.

•

Leave the receiver alone for at least three minutes.

8. The receiver again displays the blank 

 screen. 

You can cancel out of this screen back to your original viewing screen.

Use these instructions if you want to reset the receiver to be the same as 
when it was shipped. 

: 

Resetting the receiver to factory defaults discards all Favorite Lists 

except the 

 and 

 lists. 

: If you have set any locks on the receiver, and the receiver is locked, 

these locks will be kept. If the receiver is unlocked, any such locks will be 
lost. You cannot reset the receiver to default settings to discard a password 
you have forgotten. Only the Customer Service Center can reset the receiver 
to bypass a receiver lock.
1. Press the

MENU

button.