Panasonic KX-TG2970 Manuel D’Utilisation

We recommend you press [REDIAL/PAUSE] on the base unit or [PAUSE/REDIAL] 
on the cordless handset if a pause is required for dialing with a PBX or to make a 
long distance call.

Ex. Line access number [9] (PBX)

[9] 

 [REDIAL/PAUSE] or [PAUSE/REDIAL] 

 

• Pressing [REDIAL/PAUSE] or [PAUSE/REDIAL] once creates a 3.5 second 

pause. This prevents misdialing when you dial after confirming the entered 
number (p. 29, 31) or dial a stored number (p. 42).

• Pressing [REDIAL/PAUSE] or [PAUSE/REDIAL] more than once increases the 

length of the pause between numbers.

During an intercom call, you can be informed of incoming calls by 2 tones.
If you set incoming call tone to ON, this incoming call tone will be heard for as long 
as the line is ringing. To bypass the incoming call tone, set it to OFF. To set the 
incoming call tone to sound 2 times, set to “2”. The factory preset is “2”.
You can set the incoming call tone on the base unit or the cordless handset 
separately.

Base unit: Press [FUNCTION/EDIT].
Cordless handset: Press [CONF/FUNCTION]

.

Press [ ] at “Telephone”.

Scroll to “Ringer setting” by pressing [ ] 

or [ ], then press [ ].

Scroll to “Incoming call” by pressing [ ] 

or [ ], then press [ ].

Select “On”, “Off” or “2” by pressing [ ] or 

[ ].

Base unit: Press [ ] (Save), then press [STOP]. 
Cordless handset: Press the soft key (

), then press [OFF].

Phone number

Telephone

Ringer setting

Incoming call

Incoming call

       tone :2

TG2970.book  Page 52  Friday, October 15, 2004  6:21 PM