Panasonic KX-TG2970 Manuel D’Utilisation
53
Special Features
T
e
lephone System
For assistance, please call: 1-800-ADT-ASAP
FLASH Button
Pressing [FLASH/CALL WAIT] also allows you to use special features of your host
PBX such as transferring an extension call or accessing optional telephone
services such as call waiting.
• Pressing [FLASH/CALL WAIT] cancels the Temporary Tone Dialing mode or the
PBX such as transferring an extension call or accessing optional telephone
services such as call waiting.
• Pressing [FLASH/CALL WAIT] cancels the Temporary Tone Dialing mode or the
Selecting the flash time (use either
or
)
The flash time depends on your telephone exchange or host PBX.
You can select the following flash times: “700, 600, 400, 300, 250, 110, 100 or 90
ms (milliseconds)”. The factory preset is “700 ms”.
• The setting should stay at 700 ms unless pressing [FLASH/CALL WAIT] fails to
You can select the following flash times: “700, 600, 400, 300, 250, 110, 100 or 90
ms (milliseconds)”. The factory preset is “700 ms”.
• The setting should stay at 700 ms unless pressing [FLASH/CALL WAIT] fails to
pick up the Call Waiting call.
• If the unit is connected via a PBX, PBX functions (transferring a call etc.) might not
work correctly. Consult your PBX supplier for the correct settings.
Press [CONF/FUNCTION], and follow steps 2 to 6 above, using the
cordless handset. Press the soft key (
cordless handset. Press the soft key (
), then press [OFF].
1
Press [FUNCTION/EDIT].
2
Press [ ] at “Telephone”.
3
Scroll to “Initial setting” by pressing
[ ] or [ ], then press [ ].
4
Scroll to “Set tel line” by pressing [ ] or
[ ], then press [ ].
5
Scroll to “Set flash time” by pressing [ ]
or [ ], then press [ ].
6
Select the flash time by pressing [ ] or [ ].
7
Press [ ] (Save), then press [STOP].
Base Unit Handset
Base Unit
Handset
Base Unit
Telephone
Initial setting
Set tel line
Set flash time
Set flash time
:700ms
Handset
SAVE
TG2970.book Page 53 Friday, October 15, 2004 6:21 PM