Grandstream Networks BT200 Manuel D’Utilisation
Grandstream Networks, Inc.
BT200 User Manual
Page 18 of 37
Firmware 1.1.1.14
Last Updated: 12/2006
Menu Item
Menu Functions
11
Display “[11] ring 0”
Press MENU to hear the selected ring tone, press ‘↓’ or ’↑’ to select the stored ring tones.
There are 3 available ring-tones: ring 0 (default), ring 1 and ring 2. ring 3 is unavailable or
unsupported.
Press MENU to select and exit.
Press MENU to hear the selected ring tone, press ‘↓’ or ’↑’ to select the stored ring tones.
There are 3 available ring-tones: ring 0 (default), ring 1 and ring 2. ring 3 is unavailable or
unsupported.
Press MENU to select and exit.
Factory Reset
Display “ -- rESEt --”. Please be very careful when using this function.
Two options: factory reset or manual reboot.
Factory Reset:
Two options: factory reset or manual reboot.
Factory Reset:
1. Key in the physical / MAC address on back of the phone.
2. Press MENU to reset phone to FACTORY DEFAULT settings. All your setting will
2. Press MENU to reset phone to FACTORY DEFAULT settings. All your setting will
be erased.
Manual Reboot: Press MENU without keying anything.
Others
When phone is powered on and time is displayed
Press ‘↓’ or ’↑’, Display “ ring [4] ”, press ‘↓’ or ’↑’ again to hear and adjust the ring tone
volume, from 0 (off) to 7 (maximum), off and on hook to set
Press SPEAKERPHONE button, or off hook and pick up handset, press ‘↓’ or ’↑’ to adjust the
speakerphone/headset or handset volume.
Press ‘↓’ or ’↑’, Display “ ring [4] ”, press ‘↓’ or ’↑’ again to hear and adjust the ring tone
volume, from 0 (off) to 7 (maximum), off and on hook to set
Press SPEAKERPHONE button, or off hook and pick up handset, press ‘↓’ or ’↑’ to adjust the
speakerphone/headset or handset volume.
C
ONFIGURATION WITH
W
EB
B
ROWSER
The BT200 has an embedded Web server that will respond to HTTP GET/POST requests. It also has
embedded HTML pages that allow a user to configure the IP phone through any web browser.
embedded HTML pages that allow a user to configure the IP phone through any web browser.
Access the Web Configuration Menu
The IP Phone Web Configuration Menu can be accessed by the following URI:
where the
Phone-IP-Address
is the IP address of the phone. To find your IP address, press MENU and
select the Status item to see “IP: IP Address”.
NOTE: When typing the IP address into a browser, strip out the leading “0” as the browser will parse in
octet. e.g. if the IP address is: 192.168.001.014, please type in: 192.168.1.14.
NOTE: When typing the IP address into a browser, strip out the leading “0” as the browser will parse in
octet. e.g. if the IP address is: 192.168.001.014, please type in: 192.168.1.14.