Grandstream Networks BT200 사용자 설명서

 

Grandstream Networks, Inc. 

Page 18 of 37  

Last Updated:  12/2006

 

 

Display “[11] ring  0” 
Press MENU to hear the selected ring tone, press ‘↓’ or ’↑’ to select the stored ring tones. 
There are 3 available ring-tones:  ring 0 (default), ring 1 and ring 2. ring 3 is unavailable or 
unsupported. 
Press MENU to select and exit. 

Display “ -- rESEt --”.  Please be very careful when using this function. 
Two options:  factory reset or manual reboot. 
Factory Reset:   

1.  Key in the physical / MAC address on back of the phone. 
2.  Press MENU to reset phone to FACTORY DEFAULT settings.  All your setting will 

be erased. 

 
Manual Reboot:  Press MENU without keying anything. 

When phone is powered on and time is displayed 
Press ‘↓’ or ’↑’, Display “ ring [4] ”, press ‘↓’ or ’↑’ again to hear and adjust the ring tone 
volume, from 0 (off) to 7 (maximum), off and on hook to set 
Press SPEAKERPHONE button, or off hook and pick up handset, press ‘↓’ or ’↑’ to adjust the 
speakerphone/headset or handset volume. 

 

The BT200 has an embedded Web server that will respond to HTTP GET/POST requests. It also has 
embedded HTML pages that allow a user to configure the IP phone through any web browser. 
 

The IP Phone Web Configuration Menu can be accessed by the following URI: 

where the 

Phone-IP-Address

 is the IP address of the phone.  To find your IP address, press MENU and 

select the Status item to see “IP: IP Address”. 
 
NOTE: When typing the IP address into a browser, strip out the leading “0” as the browser will parse in 
octet. e.g. if the IP address is: 192.168.001.014, please type in: 192.168.1.14.