Leica CM3050 S Manuel D’Utilisation
38
Instruction Manual V1.2 - 11/2006
5.
Operation
5.4.5 Coarse feed keys
The four coarse feed keys in functional area B
function as follows:
function as follows:
Coarse feed ‘fast backward’
- Travelling speed 1,000 μm/s
- Travelling speed 1,000 μm/s
•
Press
key to activate.
Specimen head travels backward
(= away from knife):
(= away from knife):
a. until it reaches the rear limit position,
b. until it is stopped by pressing one of the
coarse feed keys (to stop the function, any
of the four coarse feed keys can be
pressed).
of the four coarse feed keys can be
pressed).
Coarse feed ‘slow backward’
- Travelling speed 500 μm/s
- Travelling speed 500 μm/s
•
To start, press
and hold.
Specimen head travels backward (= away
from knife) as long as the key is held.
from knife) as long as the key is held.
As long as the backward coarse feed (both fast
and slow) is in motion, the ‘HOME’ LED is
illuminated.
and slow) is in motion, the ‘HOME’ LED is
illuminated.
Upon reaching the rear limit position, the
‘HOME’ LED starts flashing and the display in
control panel 1 reads ‘HOME’.
‘HOME’ LED starts flashing and the display in
control panel 1 reads ‘HOME’.
Coarse feed ‘fast forward’
- Travelling speed 1,000 μm/s
- Travelling speed 1,000 μm/s
•
To activate the function, press
and hold.
The specimen head travels forward (= to-
wards the knife) as long as the key is held.
wards the knife) as long as the key is held.
Coarse feed ‘slow forward’
- Travelling speed 500 μm/s
- Travelling speed 500 μm/s
•
To activate the function, press
and hold.
The specimen head travels forward
(= towards the knife) as long as the key is
held.
(= towards the knife) as long as the key is
held.
As long as the forward coarse feed (both fast
and slow) is in motion, the ‘STOP’ LED is illumi-
nated.
and slow) is in motion, the ‘STOP’ LED is illumi-
nated.
Upon reaching the front limit position, the
‘STOP’ LED starts flashing and the display in
control panel 1 reads ‘STOP’.
‘STOP’ LED starts flashing and the display in
control panel 1 reads ‘STOP’.
LED ‘HOME’ (located in key
‘Coarse feed fast backward’)
‘Coarse feed fast backward’)
‘STOP’-LED (located in key
‘Coarse feed fast forward’)
‘Coarse feed fast forward’)
Functional area B - all models