Panasonic DW5100UL Manuel D’Utilisation

37

When the projector and external equipment are
connected by DVI connection but a proper image
cannot be obtained, switch this setting.

EDID1

Select this mainly when external equipment
(DVD player, etc.) that outputs movie video
signals is connected to the DVI terminal.

EDID2:PC

Select this mainly when external equipment
(personal computer, etc.) that outputs still
image video signals is connected to the DVI
terminal.

EDID1

EDID2:PC

480p, 576p, 1080/60i, 1080/50i,

720/60p, 720/50p, 1080/60p, 1080/50p

VGA60, SVGA60, XGA50, XGA60,

XGA70, XGA75, XGA85, WXGA768/50*,

WXGA768/60*, SXGA60

When the projector and external equipment are
connected by DVI connection but a proper image
cannot be obtained, switch this setting.

0-255:PC

Select this mainly when connecting external
equipment (personal computer, etc.) using the
DVI terminal output.

16-235

Select this mainly when connecting external
equipment (DVD player, etc.) using the HDMI
terminal output with a conversion cable, etc.

The user can set the function for the remote
control’s FUNC1 button.

SYSTEM SELECTOR: 

The button functions in the same way as
“SYSTEM SELECTOR” of “PICTURE”.

SYSTEM DAYLIGHT VIEW:

This button has the same functions as
“SYSTEM  DAYLIGHT VIEW” of “PICTURE”.

SUB MEMORY LIST:

This button has the same functions as “SUB
MEMORY LIST” of “OPTION1”.

The user can specify the position of the on-screen
menu indications.

This lets you save the cursor position in on-screen
menus.

ON : The cursor position is saved.
OFF : The cursor position is not saved.

Select sub memory number (1 to 8) corresponding
to sub memory to be erased using 

buttons.

Press the DEFAULT button.

Read the confirmation message and select.

Select sub memory number (1 to 8) using the

buttons. Select “–” if you do not wish to

use the sub memory.

Press the ENTER button.

• You cannot select sub memory of a

different signal system.

* PT-DW5100U, PT-DW5100UL only

• The optimum setting differs according

to the connected external equipment.
Be sure to check the operating
instructions for the external equipment,
etc.

• Depending on the setting, some

equipment may not provide images or
otherwise operate properly.

• The optimum setting differs according to

the connected external equipment. Be
sure to check the operating instructions
for the external equipment, etc.

• Depending on the setting, some

equipment may not provide images or
otherwise operate properly.

1 (Top left of the screen)

9 (Bottom right of the screen)

8 (Right center of the screen)

5 (Center of the screen)

7 (Top right of the screen)

2 (Left center of the screen)

3 (Bottom left of the screen)

4 (Top center of the screen)

6 (Bottom center of the screen)

• Even when this is set to “ON”, the

cursor position is not saved if the main
power of the projector is turned off.

Select the sub memory number to be registered
using the 

buttons.

Press the ENTER button.

• Sub memories range from 1 to 8.