Panasonic DW5100UL Manuel D’Utilisation

38

OPTION2

PROJECTOR ID          

INSTALLATION
ALTITUDE
DIRECTION
LAMP SELECT
LAMP RELAY
LAMP POWER 
RS-232C

CHANGE

MENU SELECT

ALL

FRONT-FLOOR

LOW

 HORIZONTAL

DUAL

OFF

HIGH

SYSTEM INFORMATION
AUTO POWER OFF
DATE AND TIME

 DISABLE

PASSWORD

The projector has an ID number setting function
that helps the user to control two or more projectors
either simultaneously or separately with a single
remote control. The ID number is set to “ALL” by
default. Hence the ID number need not be set
when only one projector is used.

1 – 64 : The ID number is set in this range.

• The ID number can be set to “ALL”, or

selected from “1” to “64”.

• If the projectors are given ID numbers,

their remote controls must be assigned
the same ID numbers, respectively.

• If the ID number of a projector is set to

“ALL”, it can be controlled by the
remote control or the PC with any ID
number. 
If multiple projectors are used and
some of them have their IDs set to
“ALL”, they cannot be controlled
separately from the projectors with
other ID numbers.
For details on remote control ID
setting, see page 15.

Switch this setting according to the projector
installation method.

FRONT-FLOOR

FRONT-CEILING

REAR-FLOOR

REAR-CEILING

The fan can be controlled in accordance with the
operating conditions.

LOW : This is the standard setting.
HIGH : This is selected when using the projector

at an altitude of over 1 400 m (4 593.2').

The fan can be controlled in accordance with the
direction in which the images are to be projected.

HORIZONTAL: This is the standard setting.
VERTICAL

: This is selected when projecting

images at a significant angle
toward the vertical (more than 30
degrees from the horizontal).

H: HORIZONTAL
V: VERTICAL

3 0

°

3 0

°

3 0

°

3 0

°

V

V

H

H

• Select the correct “DIRECTION” setting

in accordance with the direction in which
the images are to be projected.
Using the projector at the wrong
“DIRECTION” setting will shorten the
service life of the lamps.