Epson EMP-7950 Manuel D’Utilisation
158
List of ESC/VP21 Commands
User’s Guide
USB Connection Setup
In order to control the projector using ESC/VP21 commands via a USB
connection, the following preparations must be carried out.
connection, the following preparations must be carried out.
PROCEDURE
Download the USB driver (USB-COM Driver) from the
EPSON website to your computer.
EPSON website to your computer.
Install the downloaded USB driver on your computer.
Read the instructions displayed on the download screen.
Change the "COM Port" setting in the "Advanced2"
menu to "USB".
menu to "USB".
Turn the projector off.
After the
period has finished, turn the
projector's power back on.
Once the projector's power has turned back on, communication
via a USB connection will then be possible.
via a USB connection will then be possible.
1
2
3
4
5
CAUTION
If the power cable is disconnected before cool-down has finished, the
communication port will not be changed.
communication port will not be changed.