Pelco MX4004 Manuel D’Utilisation

Pelco Manual C1995M-A (10/01)

33

Figure 23.  Custom VCR Setup Menu

To program advanced VCR parameters:

1.

Select RECORD SETUP on the Main Selection menu or press the LIVE/VCR button
for about three seconds until the Record Setup menu appears. Type the password, if
requested. The currently selected menu item blinks.

2.

Make sure VCR Type in the Record Setup menu is set to CUSTOM.

3.

Use the arrow buttons to highlight CONFIGURE CUSTOM VCR.

4.

Press the +/- button. The Custom VCR Setup menu appears.

5.

Use the arrow buttons to move between items on the screen.

6.

When the menu item you desire is highlighted (blinking), press the +/- button to cycle
through the options.

Sets the VCR’s normal and alarm recording speeds.

Setting speeds in the Custom VCR Setup menu also sets speeds in the System Setup
and Record Setup menus.

 

Switch interval is the number of fields recorded by the VCR before switching to the
next camera.

After you select the setting in RECORD SPEED, arrow down to the SWITCH
INTERVAL field. This will make the multiplexer automatically set the switch interval.
You cannot change it. However, if VCR TYPE in the Record Set Up menu is set to
CUSTOM, you are allowed to set the switch interval.

7.

When you finish all the changes you want to make, go to EXIT.

8.

Press the +/- button to exit programming mode or to return to the Record Setup menu.

CUSTOM VCR SET-UP

RECORD SPEED
SWITCH INTERVAL

ALARM RECORD SET-UP

001 TO 512**

*2, 6, or 8Hr 

120 Hr

12 Hr

168 Hr

16 Hr

180 Hr

18 Hr

240 Hr

24 Hr

360 Hr

48 Hr

480 Hr

72 Hr

600 Hr

84 Hr

720 Hr

96 Hr

960 Hr

NORMAL RECORD SET-UP

*  2/6/8 HR FOR NTSC MODEL MULTIPLEXERS, 3 HR FOR PAL MODELS.
    REMAINING RECORD SPEEDS DEPEND ON VCR MODEL.
** VCR TYPE IN RECORD SETUP MENU MUST BE SET TO CUSTOM IN

ORDER TO MAKE SELECTIONS.

RECORD SPEED
SWITCH INTERVAL

00134