Leica DM4000B Manuel D’Utilisation

21

During assembly, always unplug the power
supply unit of the 106 z lamp housing from its
socket.

Never touch the glass parts of the burner
with bare hands.

Never look directly into the beam path (blind-
ing hazard).

During assembly work on xenon burners, al-
ways wear the supplied protective gloves and
face protection (Fig. 15) (risk of explosion).

This lamp housing is used with a 12V 100W halo-
gen lamp or various gas discharge lamps.

• Unscrew the fastening screws of the cover

and lift up the cover (16.1).

• Unscrew the fastening screws of the lamp

mount (16.8) and pull out the mount (Fig. 17).

Fig. 15
Protective gloves and mask

Fig. 16     106 z lamp housing (on the side, open)
1

Cover raised

Collector

12 V 100 W lamp or
gas discharge lamp in mount

Reflector (mirror)

5, 6, 7 Adjusting screw for x-y reflector
8

Fastening screw for lamp mount

Socket for contact plug

1

2

3

8

9

8

4

5

6

7