Manuel D’UtilisationTable des matièresSafety5IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS5Prepare for Floor-Anchoring (optional)6System arrangements6Hole positions for a stand-alone UPS enclosure with L-shaped anchoring brackets7Hole positions for up to four UPS units in parallel with U-shaped anchoring brackets.8Prepare for Cables9Remove the front panel9Remove the top cover9Remove the cable landing cover and bottom plates10Remove the XR Battery Modules11Anchor the UPS and additional XR Battery or UPS Enclosure(s) (optional)12Run the Cables15Connect Power in Installations with Busbars15Install isolators15Install busbars16Connect Power in Installations with Cables20Install power cables20Connect Communication Cables22Connect the EPO23Connect the EPO to the UPS and the XR Battery Enclosure23Final Mechanical Assembly24Level the Enclosures (L-shaped Floor Anchoring Brackets) and Install Batteries24Level the enclosures24Install battery-securing and floor-anchoring brackets25Reinstall the Enclosure Plates26Reinstall the cable landing cover plates and the bottom plates26Reinstall the top cover, battery compartment cover, and the front panel26Specifications27Battery voltage and current27Recommended cable sizes27EPO requirements27Torque specification27Post-Installation Checklist28Taille: 1,5 MoPages: 32Language: EnglishOuvrir le manuel
