Manuels d'utilisation pour APC G50B-20A2

Table des matières

• Overview

  5
• Inventory

  5
• Safety

  5
• Components

  6
  • Front view

    6
  • Rear view

    6
  • Removable Flashlight

    6
• Install the Unit

  7
  • Install the unit on a flat surface

    7
    • Remove the mounting brackets

      7
    • Attach the stabilizing feet

      7
  • Install the unit in a rack or enclosure

    7
• Connect A/C Power

  7
  • Connect the unit to A/C power

    7
• Connect Components to the Unit

  8
  • Power-Saving Master and Controlled outlets

    8
    • 1 . Before connecting components to the unit, determine which components will utilize the Master ...

      8
    • 2 . Connect components to the outlets on the back panel of the unit.

      8
    • 3 . Configure the G50B-20A2 to recognize the master outlet. See “Configure Master and Controlled ...

      8
  • Always On, Switched, and Delayed outlets

    8
    • Always On outlet

      8
    • Switched outlet

      8
    • Delay outlets

      8
• Basic Functions

  9
  • Front panel buttons

    9
    • Power

      9
    • Status

      9
    • Setup

      9
    • Up/Down

      9
  • Display interface LEDs

    9
• Configure the Unit

  10
  • Set the Language

    10
    • Select a language

      10
    • Configure the brightness of the display.

      10
  • Sequence Delay outlets

    10
  • Configure Master and Controlled outlets

    10
    • Enable and Disable the Power-Saving feature

      10
    • Setting the threshold

      10
  • View status of the unit

    10
  • Calculate power savings and money savings

    10
    • Enter your utility rate

      10
      • 1 . Use the Setup menus, scroll to the menu screen Green Function and ensure the function is set ...

        10
      • 2 . Scroll to the next screen, Utility Rate. Use the Up and Down arrow keys to enter the rate you...

        10
    • View energy and money savings

      10
  • Current Sensing outlets

    10
  • Lock the unit

    11
  • Shut down the unit

    11
• Display Interface Menus

  11
  • Status menu

    11
    • Utility Source, Voltage and Frequency.

      11
    • Total Output

      11
    • Delay Output

      11
    • Energy Saved

      11
    • Money Saved

      11
    • Contact Information

      12
    • Model and Serial Number

      12
    • Firmware version

      12
    • Recent Faults

      12
  • Setup menu

    12
    • LCD dimmer

      12
    • LED dimmer

      12
    • Delay1-Delay4

      12
    • Power Threshold

      13
      • 1 . Ensure a master device is connected to the Master outlet. Put that device into Sleep or Stand...

        13
      • 2 . Press Status and hold for three seconds.

        13
      • 3 . The G50 unit will display now recognize the threshold level of the Master device and save it ...

        13
    • Contact Information

      13
    • Clear Saved Power.

      13
    • Language

      14
    • Restore default settings

      14
  • Save screen as default

    14
• Common problems and solutions

  15
  • The unit will not turn on

    15
  • The Overload indicator is illuminated

    15
  • The Wiring OK indicator is not illuminated

    15
    • • The wall outlet polarity is reversed.

      15
    • • The neutral wire is overloaded.

      15
    • • The earth ground is not connected at the wall outlet.

      15
• Contact APC APV Technical Support

  16
• Warranty

  16
• Spanish

  17
• French

  30
• APC Worldwide Customer Support

  44
  • Entire contents copyright 2010 American Power Conversion Corporation. All rights reserved. Reprod...

    44