Manuel D’UtilisationTable des matièresSection 1 – Installation12Section 2 – Wiring12Section 3 – Adjustments12Section 4 – Operating Instructions13Section 5 – Maintenance and Troubleshooting13SECTION 1 - INSTALLATION151.1 Specifications151.2 Mounting Options161.3 Chain Guide Adjustment171.4 Pad Mount Installation181.5 Mounting Stand Installation191.6 Chain Installation221.7 Warning Sign Installation24SECTION 2 – WIRING252.1 High Voltage Connections262.2 Control Wiring272.3 Loop Detector Wiring282.4 Auxiliary Device Wiring292.5 Primary – Secondary (Bi-Parting) Gate Wiring302.6 Terminal Identification and Description312.6.1 Main Terminal (P1)312.6.2 Limit Switch Connector322.6.3 Reversing Device Connector32SECTION 3 - ADJUSTMENTS333.1 Circuit Board Adjustments33Power LED indicates that low voltage power is applied to the circuit board. Input LEDs should be OFF and will only illuminate when the input is activated. The limit LED will be ON when the respective limit switch is activated.3.2 Switch Settings333.2.1 SW 1 (Right Switch) Description and Function353.2.2 SW 2 (Left Switch) Description and Function353.3 Limit Adjustment363.3.1 Limit Adjustment for 9210 Operator363.3.2 Limit Adjustment for 9220, 9230 Operators373.4 Reverse Adjustment383.5 Speed Control (9220, 9230 Only)393.6 Current Sensor Wiring39SECTION 4 – OPERATING INSTRUCTIONS414.1 Power and Reset Switches414.2 Shutdown Conditions424.2.1 Soft Shutdown424.2.2 Resetting a Soft Shutdown424.2.3 Hard Shutdown434.2.4 Resetting a Hard Shutdown434.3 Manual Gate Operation44SECTION 5 – MAINTENANCE AND TROUBLESHOOTING455.1 Maintenance455.2 Operator Diagnostics46Constant tone is heard when power is applied:46Constant tone is heard:46Short tone is heard every five seconds:46Operator runs for 1 second and stops, two short tones are heard:465.3 Trouble Shooting465.4 Accessories49Taille: 660 koPages: 57Language: EnglishOuvrir le manuel
