Manuais de utilizador para DKS Enterprises 9210

índice analítico

• Section 1 – Installation

  12
• Section 2 – Wiring

  12
• Section 3 – Adjustments

  12
• Section 4 – Operating Instructions

  13
• Section 5 – Maintenance and Troubleshooting

  13
• SECTION 1 - INSTALLATION

  15
  • 1.1 Specifications

    15
  • 1.2 Mounting Options

    16
  • 1.3 Chain Guide Adjustment

    17
  • 1.4 Pad Mount Installation

    18
  • 1.5 Mounting Stand Installation

    19
  • 1.6 Chain Installation

    22
  • 1.7 Warning Sign Installation

    24
• SECTION 2 – WIRING

  25
  • 2.1 High Voltage Connections

    26
  • 2.2 Control Wiring

    27
  • 2.3 Loop Detector Wiring

    28
  • 2.4 Auxiliary Device Wiring

    29
  • 2.5 Primary – Secondary (Bi-Parting) Gate Wiring

    30
  • 2.6 Terminal Identification and Description

    31
  • 2.6.1 Main Terminal (P1)

    31
  • 2.6.2 Limit Switch Connector

    32
  • 2.6.3 Reversing Device Connector

    32
• SECTION 3 - ADJUSTMENTS

  33
  • 3.1 Circuit Board Adjustments

    33
  • Power LED indicates that low voltage power is applied to the circuit board. Input LEDs should be OFF and will only illuminate when the input is activated. The limit LED will be ON when the respective limit switch is activated.3.2 Switch Settings

    33
  • 3.2.1 SW 1 (Right Switch) Description and Function

    35
  • 3.2.2 SW 2 (Left Switch) Description and Function

    35
  • 3.3 Limit Adjustment

    36
  • 3.3.1 Limit Adjustment for 9210 Operator

    36
  • 3.3.2 Limit Adjustment for 9220, 9230 Operators

    37
  • 3.4 Reverse Adjustment

    38
  • 3.5 Speed Control (9220, 9230 Only)

    39
  • 3.6 Current Sensor Wiring

    39
• SECTION 4 – OPERATING INSTRUCTIONS

  41
  • 4.1 Power and Reset Switches

    41
  • 4.2 Shutdown Conditions

    42
  • 4.2.1 Soft Shutdown

    42
  • 4.2.2 Resetting a Soft Shutdown

    42
  • 4.2.3 Hard Shutdown

    43
  • 4.2.4 Resetting a Hard Shutdown

    43
  • 4.3 Manual Gate Operation

    44
• SECTION 5 – MAINTENANCE AND TROUBLESHOOTING

  45
  • 5.1 Maintenance

    45
  • 5.2 Operator Diagnostics

    46
  • Constant tone is heard when power is applied:

    46
  • Constant tone is heard:

    46
  • Short tone is heard every five seconds:

    46
  • Operator runs for 1 second and stops, two short tones are heard:

    46
  • 5.3 Trouble Shooting

    46
  • 5.4 Accessories

    49