Manuel D’UtilisationTable des matièresPreface3Important4Precautions for Safety6Contents9User Registration11Terminology121. Outline131.1 Package Components131.2 Other Tool Products Required for Development141.3 System Configuration151.3.1 System Configuration151.3.2 Names and Functions of the PC7501 Upper Panel LEDs161.4 Specifications181.5 Operating Environment192. Setup202.1 Flowchart of Starting Up the Emulator202.2 Installing the Emulator Debugger (M16C R8C PC7501 Emulator Debugger)212.2.1 Installing the Emulator Debugger212.3 Connecting the Host Machine222.4 Connecting the PC750123Cautions for Connecting the PC7501:232.5 Connecting the Power Supply for the Emulator24Cautions for AC Adapter:242.6 Turning ON the Power252.6.1 Checking the Connections of the Emulator System252.6.2 Turning ON/OFF the Power25Notes on Power Supply:252.6.3 LED Display When the Emulator Starts Up Normally262.7 Downloading Firmware272.7.1 When It is Necessary to Download Firmware272.7.2 Downloading Firmware in Maintenance Mode27Note on Downloading Firmware:272.8 Self-check282.8.1 Self-check Procedure282.8.2 If an Error is Detected in the Self-check292.9 Connecting the User System302.9.1 Connecting to an 80-pin 0.65-mm-pitch Foot Pattern312.9.2 Connecting to a 100-pin LCC Socket322.9.3 Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 1)332.9.4 Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 2)342.9.5 Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 3)352.9.6 Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 4)362.9.7 Connecting to a 100-pin 0.5-mm-pitch Foot Pattern (Part 1)372.9.8 Connecting to a 100-pin 0.5-mm-pitch Foot Pattern (Part 2)382.9.9 Connecting to a 100-pin 0.5-mm-pitch Foot Pattern (Part 3)392.9.10 Connecting to a 128-pin 0.5-mm-pitch Foot Pattern402.10 Switch Settings412.10.1 Switch Settings of the JP1412.10.2 A/D Conversion Bypass Capacitors422.10.3 Pullup of Emulation Ports432.11 Selecting Clock Supply442.11.1 Clocks442.11.2 Using an Internal Oscillator Circuit Board442.11.3 Using the Oscillator Circuit on the User System482.11.4 Using the Internal Generator Circuit483. Usage (How to Use the Emulator Debugger)493.1 Starting Up the Emulator Debugger493.1.1 INIT Dialog Box493.1.2 MCU Setting Dialog Box543.1.3 Checking Connections of the Emulator System573.2 Editor (Source) Window583.3 Hardware Breakpoint Setting Window623.4 Trace Window673.5 RAM Monitor Window704. Hardware Specifications714.1 Target MCU Specifications714.2 Access Timing724.2.1 Operation Timing of Memory Expansion Mode and Microprocessor Mode (Vcc1=Vcc2=5V)724.2.2 Operation Timing of Memory Expansion Mode and Microprocessor Mode (Vcc1=Vcc2=3V)774.3 Differences between the Actual MCU and Emulator824.4 Connection Diagrams854.5 External Dimensions874.5.1 External Dimensions of the Emulation Probe874.5.2 External Dimensions of the M30800T-PTC884.6 Notes on Using This Product895. Troubleshooting945.1 Flowchart to Remedy the Troubles945.2 When the Emulator Debugger Does Not Start Up Properly955.3 How to Request for Support986. Maintenance and Guarantee996.1 User Registration996.2 Maintenance996.3 Guarantee996.4 Repair Provisions996.5 How to Make Request for Repair100Taille: 2,8 MoPages: 102Language: EnglishOuvrir le manuel