Manuels d'utilisation pour Sony Ericsson DFP-D3000

Table des matières

• Cover

  1
• Table of Contents

  3
• Check list

  5
• 1. Introduction

  7
• 2. Equipment and accessories

  9
• 3. Basic checks of site and installation

  11
• 4. Checks of correct DFP-R3000 Reader mounting

  15
• 5. A-Chain alignment using DFP-D3000 front panel controls

  17
• 6. B-Chain Alignment

  21
• 7. Overall systems check and listening test

  31
• 8. Troubleshooting

  33
• 9. Appendix

  35
  • 9.1 DFP-D3000 Rear Panel Connector Pin Assignment

    35
  • 9.2 DFP-D3000 Input/Output Level

    38
  • 9.3 Changeover Settings

    39
  • 9.4 Settings for using DFP-D3000 as DFP-D2000

    40
    • 9.4.1 Conditions

      40
    • 9.4.2 Connections and Settings when Connecting the Output of an Existing System

      40
    • 9.4.3 Connections and Settings When Connecting to the Input of the Existing System

      43
  • 9.5 Description on Connection of DA-20 and DFP-D3000

    46
    • 9.5.1 Outline of System

      46
    • 9.5.2 Requirements at SDDS Side

      46
    • 9.5.3 Connection to the DA-20 and Setting the Operation Mode

      46
    • 9.5.4 Connections for Using the AUX1 Input

      47
    • 9.5.5 Connections for Using AUX2 Input

      49
    • 9.5.6 Audio Connecting the DA-20 and DFP-D3000

      51
  • 9.6 Connecting the CP-500 and DFP-3000

    52
    • 9.6.1 Connecting the DFP-D3000 to the CP-500 with the DFP-D3000 as the master

      52
    • 9.6.2 Connecting the DFP-3000 to the CP-500 with the CP-500 as master.

      57
  • 9.7 Connecting the DTS-6, DTS-6D and DFP-D3000

    60
    • 9.7.1 Outline of System

      60
    • 9.7.2 Requirements of SDDS Side

      60
    • 9.7.3 Connecting the DTS Processor DTS-6

      60
    • 9.7.4 Connection of Control Signals from DTS Processor DTS-6D

      65
    • 9.7.5 Audio Connecting the DTS-6, DTS-6D and DFP-D3000

      70
  • 9.8 Corresponding to DFP-D3000 Surround EX

    71
    • 9.8.1 Restrictions on Control of Surround EX Decoder

      71
    • 9.8.2 Connections of Audio System

      71
    • 9.8.3 Actual Connection of Control System

      73
    • 9.8.4 SA-10 Operations When Controlling from the DFP-D3000

      74
    • 9.8.5 Controlling Surround EX from DA-20

      75
    • 9.8.6 Controlling Surround EX from DTS-6 or DTS-6D

      77
    • 9.8.7 Controlling Surround EX control from Automation Controller

      77
    • 9.8.8 Adjustments of Audio System

      78
  • 9.9 Test Cable for Performing A-Chain Adjustment

    85
  • 9.10 Adjusting the Analog Track Pickup

    86
    • 9.10.1 Preliminary Preparations Before Adjustments

      86
    • 9.10.2 Lateral Film Guide Adjustment

      86
    • 9.10.3 Lateral Exciter Lamp Adjustment

      86
    • 9.10.4 Lateral Solar Cell Adjustment

      86
    • 9.10.5 Vertical Adjustment of Exciter Lamp

      87
    • 9.10.6 Slit Lens Adjustment

      87
    • 9.10.7 Double Checking of Illumination Inconsistency

      87
    • 9.10.8 Wiring Check

      87
  • 9.11 Description of the DFP-D3000 Setup Software Menus

    88
    • 9.11.1 Start-up Screen

      88
    • 9.11.2 Description of File Menu Items

      90
    • 9.11.3 Description of Config Menu Items

      91
    • 9.11.4 Description of Preset Menu Items

      92
    • 9.11.5 Description of A-Chain Menu Items

      93
    • 9.11.6 Description of Tools Menu Items

      94
    • 9.11.7 Description of Master Menu Items

      95
    • 9.11.8 Description of Test Menu Items

      96
    • 9.11.9 Description of Help Menu Items

      97