Land Pride rcf3696 Manuale Utente

Pagina di 60
50
Section 5: Maintenance & Lubrication
RCF3696, RCFM3696, RCF3610, & RCFM3610 Rotary Cutters   326-600M
12/15/15
T-Gearbox
Check oil level in gearbox by removing lower rear plug in 
gearbox case. If oil is below lower rear plug hole, add 
recommended gear lube through top plug hole until oil 
flows out of lower rear plug hole. Reinstall oil plugs and 
tighten.
Type of Lubrication: 80-90W EP Oil 
Quantity = Fill until oil flow from upper rear port of 
gearbox case.
NOTE:  Do not overfill! Cutter should be level when 
checking oil.
8
Hrs
Gearbox
Method 1: Unscrew top vented dipstick (#1). Wipe oil 
from dipstick and screw dipstick in without tightening. 
Unscrew dipstick and check oil on dipstick. If below 
bottom level mark, add recommended gear lube through 
dipstick hole until oil reaches top mark on dipstick. 
Reinstall vented dipstick and tighten.
Method 2: Remove side oil plug (#2). If oil is below 
bottom of plug hole, add recommended gear lube 
through top dipstick hole until oil flows out of side plug 
hole. Reinstall and tighten side oil plug (#2) and vented 
dipstick (#1).
Type of Lubrication: 80-90W EP Gear Lube 
Quantity = Fill until oil reaches top mark on dipstick or 
begins to flow out side plug hole in gearbox.
NOTE:  Do not overfill! Cutter should be level when 
checking oil. Oil expands when hot, therefore, always 
check oil level when cold.
8
Hrs.
30215
Do Not Overfill
IMPORTANT: Your cutter is shipped with a vented 
dipstick packaged in the Operator’s Manual bag and 
should have been installed in the gearbox by your 
Land Pride dealer. Please see your Land Pride dealer 
if vented dipstick was not included.
NOTE:  Use a suction or siphon pump to drain 
gearboxes of oil when there is not an oil drain plug.
33419
Do Not Overfill
IMPORTANT: Your cutter is shipped with a vented 
dipstick packaged in the Operator’s Manual bag and 
should have been installed in the gearbox by your 
Land Pride dealer. Please see your Land Pride dealer 
if vented dipstick was not included.
NOTE:  Use a suction or siphon pump to drain 
gearboxes of oil when there is not an oil drain plug.
35008
RCF(M)3610 Flex Coupler
Type of Lubrication: Multi-Purpose Grease
Quantity = As required
8
Hours