Go-Video 9100 Manuale Utente

CHAPTER 8 - SEARCHING & INDEX FEATURES   

The Tape Counter shows you the exact location of your tapes in
hours, minutes and seconds. The Time Remaing indicator
shows you how much time is left until the end of the tape.

You can view the tape counter/time remaining in two places:

Front Panel Display - Press 

CLK/CTR

 repeatedly to switch the

front panel display among the clock, tape counter and
time remaining.

On-Screen Display - Press 

DISPLAY

 to view the counter or

time remaining on-screen for both decks (the OSD will
match the Front Panel Display).

To reset the tape counter:

Press 

CLK/CTR

 until the tape counter is displayed on the

front panel display.

Press 

CLEAR

 to reset the counter to 0:00:00. You can do

this anywhere on a tape.

Note: Any time you insert a tape into your Dual-Deck VCR,

the Tape Counter will reset to zero automatically.

Memory Stop will automatically stop the tape at counter
position 0:00:00 when rewinding or fast-forwarding. This is
a handy feature when editing videotapes.

To activate Memory Stop:

Press 

MEMORY

 on the remote control. You will see an “M”

below the tape counter setting on the On-Screen Display.

Press 

REW

 or 

FF

. Your Dual-Deck VCR will advance to

tape counter position 0:00:00 and stop automatically.

The Tape Counter (circled left) and

Time Remaining (circled right)

appear on-screen for both decks.

The letter “M” signifies that

Memory Stop is enabled.

Press 

CLK/CTR

 to cycle the front

panel display among the clock,

tape counter and time remaining.