Motorola G24 Manuale Utente

This command instructs the G24 to query or set Filtering Incoming Calls parameters. The 
command is a "none basic" command and will not work if SIM card is not present or if SIM card 
is not in READY state.

MFIC parameters are saved after power cycle.

This feature is not active by default, however, changing the FLEX can activate it.

The set command defines the 
Incoming Calls Filtering parameters - 
this command enable/disable the 
filtering, set the search phone book, 
define the respond type and set the 
search phone book entries range.
Each of the parameters has its own 
default value, which will take effect if 
it is omitted from the command line. In 
case the parameter is omitted with its 
pre - leading comma, then the already 
set value will not be changed to its 
default. See examples bellow.
One exceptional is the dealing with the 
<pb_range> parameter. When 
changing the search <pb> without also 
changing/setting the <pb_range>, there 
is a possibility that the already set 
<pb_range> is too big for the new 
search <pb>. For example, when 
changing from "MT" to "SM"/"ME" 
while the <pb_range> is equal to 235. 
The "SM"/"ME" phone books may not 
hold so many entries. In such cases the 
new search <pb> maximum size will 
be set as the new value of the 
<pb_range>.

The read command returns the current 
MFIC set parameters value.

The test command returns the possible 
ranges of MFIC parameters.