Motorola G24 Manuale Utente
Call Control
3-42
AT Commands Reference Manual
December 31, 2007
+MHUP, Motorola Hung UP call
This command hung up specific call or all calls, and report a specific disconnect cause to the NW.
The following table shows the +MHUP parameters.
Example
AT+MHUP=?
+MHUP: (1,16,17,18,27,31),(0-7)
OK
AT+MHUP = 16,3//Hung up call #3, and send cause "Normal call clearing"
OK
AT+MHUP = 17//Hung up all calls, and send cause "User busy"
OK
AT+MHUP = 17,0//Hung up all calls, and send cause "User busy"
OK
Command
Type
Syntax
Response/Action
Remarks
Set
AT+MHUP=<cause>
[,<call_id>]
OK
or:
+CME ERROR: <err>
Test
AT+MHUP=?
+MHUP:(1,16,17,18,27,3
1),(0-7)
OK
Show list of supported <cause>'s and
list of supported <call_id>'s.
list of supported <call_id>'s.
Table 3-18: +MHUP Parameters
<Parameter>
Description
<cause>
Cause description, send to the NW in the "disconnect" message.
1
1
"Unassigned (unallocated) number"
16
"Normal call clearing"
17
"User busy"
18
"No user responding"
27
"Destination out of order"
31
"Normal, unspecified"
<call_id>
Index of the call id (same as <idx> in +CLCC command)
0
0
All calls (default).
1-7
Specific call id.