Motorola DCH100 Manuale Utente

18

 

The remote 
control does not 
work. 

•  Verify that the remote control is in “Cable” 

mode. 

•  Verify that there are no obstructions 

between the remote control and the DCH 
receiver. Aim the remote control directly at 
the DCH receiver front panel, not the TV or 
VCR. 

•  If using an external IR senor connected to 

the EXT IR input on the rear panel, ensure 
the cable is properly connected to the rear 
panel input and that there is a clear line-of-
sight from the remote to the sensor. 

•  The angle between the remote control and 

the DCH receiver may be too large. Stand 
in front of the DCH receiver and not too far 
to either side. 

•  Press and release operation keys one at a 

time, firmly and deliberately. 

•  Check the batteries in the remote control. 

Install new batteries if needed.