3M 2550 Manuale Utente

 46 

78-9000-0192-2 Rev C

Step 4.  To access the memory locations, press Mem 

Select [SK].

 

− Save [SK] will place each entry in 

sequential order in memory (M1–M5) 

until five readings have been stored. The 

receiver will overwrite saved entries in 

excess of five, beginning with M1.

Step 5.  Optional step: Press Clear All [SK] to delete all stored depth information.
Step 6.  Press Mem Select [SK] to select a specific memory location (M1 - M5) to store 

the depth readings. When the preferred location appears on the display, press 

Save [SK]. The display and memory location will populate with the current 

information.

Step 7.  Each memory location can be reviewed by pressing Mem Select [SK Toggle].
Step 8.  Press Menu/OK [5] to return to Marker Locate Mode.

In the User Template display, the operator can create and modify templates to be 

written to iD markers. Note that the easiest way to create user templates is by using 

the 3M

™

 Dynatel

™

 PC Tool Kit Software on a PC and then downloading them to a 

receiver via the RS232 Serial Port [16] ([15] for 2550 locator) on the receiver and the 

provided RS232 cable or RS232-to-USB adapter cable. The 3M

™

 Dynatel

™

 PC Tool Kit 

Software is available free of charge at www.3M.com/dynatel under the Software section; 

2550/2573/2250M/2273M/1420 Locator PC Tools xx.x.x (EXE xx.xMB).

A. Creating New Templates

Menu/OK [5:Toggle to MAIN MENU] + Data/Template [SK:2] + User Template [SK:c]

Step 1.  Select Create New by pressing the up/down 

arrows [SK].

Step 2.  Press View/Edit [SK].

Step 3.  Name the template.
Step 4.  Press Modify [SK] to manually enter the 

name of the template.