Samsung NX1 Manuale Utente

Shooting Functions > 

Flash

Set wireless sync to control internal and external flash units remotely 
via wireless signals. The remote system consists of a master flash that is 
mounted on the camera and one or more slave flash units. A slave flash is 
assigned to one of three groups: A, B, or C.

In Shooting mode, press [m] 

ĺ

 b 

ĺ

 Internal Wireless 

Flash or External Wireless Flash 

ĺ

 an option.

* Default

Set to use wireless sync. (Off*, On)

Select channels for wireless sync. There are four remote 
channels available to allow multiple remote systems to 
operate at the same time. Master and slave flash units, in 
the same remote system, must be set to the same channel. 
(Ch. 1, Ch. 2, Ch. 3, Ch. 4)

Set the flash mode for group A, B, or C. Changes to the 
flash mode must be made on the master flash. The 
changes are then applied to slave group A, B, or C, and 
the slave groups operate as a remote system of the flash 
mode (TTL or manual) according to the settings for the 
master flash.

• 

A-TTL: Set the exposure of the flash when the flash 
mode is A-TTL.

• 

Manual Flash: Set the brightness of the flash when the 
flash mode is Manual Flash.

• 

Off: Do not fire the flash.

• 

You cannot select External Flash Settings when you use the External 
Wireless Flash function.

• 

For information about using the wireless sync feature with an external flash, 
refer to the optional external flash’s (SEF-580A) user manual.