Samsung NX1 Manuale Utente
216
Appendix
Updating the firmware
Connect the camera to the computer and update the firmware of the
camera or the lens.
camera or the lens.
•
You cannot run a firmware update without a fully charged battery. Recharge
the battery fully before running a firmware update.
the battery fully before running a firmware update.
•
If you update the firmware, user settings and values will be reset. (Date, time,
language, and video out will not change.)
language, and video out will not change.)
•
Do not turn the camera off while the update is in progress.
1
In Shooting or Playback mode, press [m]
ĺ
q
ĺ
USB
Connection
ĺ
Mass Storage. (p. 194)
2
Turn off the camera.
3
Connect your camera to the computer with the USB cable.
•
You must plug the small end of the USB cable into your camera. If the
cable is reversed, it may damage your files. The manufacturer is not
responsible for any loss of data.
cable is reversed, it may damage your files. The manufacturer is not
responsible for any loss of data.
•
If you try to plug the USB cable into the HDMI port, the camera may not
work properly.
work properly.
•
When using a USB 2.0 cable, plug the USB cable into the lower part of the
USB port. If the plug connectors are forced, the device may be damaged.
The manufacturer is not responsible for any loss of data.
USB port. If the plug connectors are forced, the device may be damaged.
The manufacturer is not responsible for any loss of data.
When using a USB 3.0 cable (optional), connect the USB cable as shown in
the illustration.
the illustration.