ARRI 416 Manuale Utente
Running the Camera
If the operation control indicator glows red while in Standby,
the camera is not ready and will not run (see “Overview
of Display Symbols”).
• Briefly press the “RUN” button. While the camera is
running up to speed, the operation control indicator
a
photo
glows red. Once the set frame rate has been
reached, the operation control indicator turns green.
Note:
If the “PHASE” button has not been pushed after
power on or after a new magazine has been
attached, the first time “RUN” is pressed the camera
performs a 2 second loop check before running.
Stopping the Camera
• Press the “RUN” button again
a
photo
briefly. While
the camera is slowing down the operation control
indicator glows red. The mirror shutter automatically stops
in a position that enables unrestricted viewing through
the viewfinder. On reaching this position, the operation
control indicator flashes green before going out.
Camera
Operation
RUN button
RUN button
phase button
SEL/SET
buttons
buttons
operational control indicator
black bar
to indicate
Mode 1
to indicate
Mode 1