ARRI 416 User Manual

If the operation control indicator glows red while in Standby, 

the camera is not ready and will not run (see “Overview 

of Display Symbols”).

•  Briefly press the “RUN” button. While the camera is 

running up to speed, the operation control indicator 

a

 glows red. Once the set frame rate has been 

reached, the operation control indicator turns green.

Note: 

If the “PHASE” button has not been pushed after 

power on or after a new magazine has been 

attached, the first time “RUN” is pressed the camera 

performs a 2 second loop check before running.

•  Press the “RUN” button again 

a

 briefly. While 

the camera is slowing down the operation control 

indicator glows red. The mirror shutter automatically stops 

in a position that enables unrestricted viewing through 

the viewfinder. On reaching this position, the operation 

control indicator flashes green before going out.

RUN button

RUN button

phase button

SEL/SET 
buttons

operational control indicator

black bar 
to indicate 
Mode 1