Toshiba IK-WB01A Manuale Utente

Using LAN Cable

The following shows two different network configurations using a LAN cable
connection to operate the network camera.

・Crossover connection

・Connection via a hub

● Using a crossover cable to establish a connection (example)

Network camera

Personal computer

192.168.0.30

LAN cable (crossover)

192.168.0.50

IP address

IP address

Crossover cable is not provided with the product.

● Establishing a connection via a hub (example)

Network camera

Personal computer

Hub

IP address

192.168.0.30

IP address

192.168.0.50

LAN cable（straight through）

LAN cable（straight through）

Internet

●

You do not need to assign an IP address to a hub.

●

In the case of not using DHCP server, the IP address for the camera is
automatically set to 192.168.0.30 in default. Therefore, set the IP address
for your computer to 192.168.0.50 here.

●

There will be no problem to use the LAN port of your broadband router instead
of using a hub.

 However, when using the broadband router, if the DHCP server function is

set "ON" and turn on the power after connecting the camera with the router,
the camera gets the IP address from the router's DHCP server and it may
not be 192.168.0.30.

 For more information, read your user's guide for broadband router.
 It is also recommended to set the computer's IP address from the router's

DHCP server.

 For more information, read your computer's user's guide.