Toshiba IK-WB01A Manuale Utente
25
Introduction
Installation/Setup
Others
Operation
Using Wireless LAN
The followings show different network configurations using a wireless LAN
connection to operate the network camera.
connection to operate the network camera.
■ When using adhoc method
The adhoc method is used for connecting the network camera and a personal
computer.
computer.
Network camera
Adhoc method
Personal computer
IP address
192.168.0.50
(example IP address)
IP address
192.168.0.30
Using a wireless LAN to establish a connection requires the following conditions.
1．Both the network camera and the personal computer are on the same network
segment.
2．Both the network camera and the personal computer use the same
communication channel.（→ page 32）
3．Both the network camera and the personal computer have the same ESS-ID
set.（→ page 32）
4．If WEP is used, both the network camera and the personal computer use
the same WEP encryption/key.（→ page 33）
■ When using infrastructure
Connect the network camera and a personal computer via an Access Point/
Wireless Broadband Router.
Wireless Broadband Router.
Access Point/Wireless Broadband Router
Network camera
Personal computer
IP address
192.168.0.50
(example IP address)
IP address
192.168.0.30
Using an intranet requires the following condition.
・The default gateway is set correctly for the network camera if the
network camera will be accessed from different networks.