Toshiba IK-WB21A Manuale Utente

● Function Settings
1) Set a "Scan Speed."

Fast
Slow

2) Set "Power on Default Position"

This function designates where camera moves when camera is turned
on.

Center:

Moves to positions of 0｡ for PAN and 0｡ for TILT.

Home:

Moves to Preset Number 1.

Scan:

Starts auto panning.

Auto Patrol:

Starts auto patrol.

3) Set "Freeze Frame."

ON: Under "Auto Patrol", images will not be shawn while camera moves

from Preset Number to next Perset Number.

OFF: No "Freeze Frame".

● Association to Alarm
1) Set "Alarm Association."

OFF:

Does nothing.  "Alarm Association Type" or "Preset Num-
ber" cannot be set.

Preset:

Performs preset moving when an alarm occurs.

Auto patrol:

Starts auto patrol when an alarm occurs.

2) Set "Alarm Association Type."

Alarm In:

"Alarm In" will activate "Association to Alarm".

Motion Detection: "Motion Detection" will activate "Association to Alarm".

3) Set when "Alarm Association" is set to "Preset."

Preset Number:

Choose preset Number.

Resume to Previous Position:Camera moves back to position before "Assciation to

Alarm" ocured.
Enable:

10, 30 and 60 seconds

Disable:

Stays in the position moved to "Associa-
tion to Alarm."

Basic settings for PAN and TILT.

Click "PAN/TILT Settings" in the Admin. Menu.

･ The sub menu for PAN/TILT Settings will appear.

Click "1. General" in the sub menu.

･ A setup screen of "PAN/TILT - Basic Settings will appear.

Configure each setting items.

･ Click the Save button to save settings.
･ The settings will not be reflected unless the Save button is clicked.