Toshiba IK-WB21A Manuale Utente

Set audio input to and output from the network camera.

Click "Camera Settings" on the Admin. Menu.

･ A sub menu for Camera Settings will appear.

Click "6. Audio" in the sub menu.

･ The screen of "Camera - Audio" will appear.

Configure each setting items.

･ Click the Save button to save settings.
･ The settings will not be reflected unless the Save button is clicked.

● Audio Input

Set audio input.
ON: The camera receives audio.
OFF: The camera does not recieve audio.

･ Set to "ON" when inputting audio from a microphone connected to the

camera.

● Audio Input Level

An audio input level is set.
HIGH:

Increases the audio input level.

MIDDLE:

Adjusts the audio input level to a medium level.

LOW:

Reduces the audio input level.

● Audio Output

Set audio output.
ON: The camera receives audio.
OFF: The camera does not recieve audio.

･ Set to "ON" when outputting audio from a microphone connected to

the camera.

● Audio Output Level

An audio output level is set.
HIGH:

Increases the audio output level.

MIDDLE:

Adjusts the audio output level to a medium level.

LOW:

Reduces the audio output level.

● E-mail Address List
1) Set ON or OFF in "Always Sent to Administrator E-mail Address."

ON: Always send to administrator E-mail address.

OFF: Not send to administrator E-mail address.

2) Enter "Mail-to Address."  (Up to ten addresses)

3) Check send conditions.

Alarm In:

E-mail is sent to checked addresses when camera
detect alarms.

Motion Detection: E-mail is sent to checked addresses when camera

motion is detected.

●

POP is a protocol for receiving e-mail from e-mail box.  As the network camera
does not receive e-mail, e-mail in POP server will not be lost due to this
setting.

●

The e-mail function of the network camera is not compatible to "SMTP Auth."

●

The frame rate deteriorates if resolution of "Attached Image Size" differs
from "Resolution" in "1. General" of "Camera Settings".

●

When wishing to send e-mail to administrator's address only in case of either
"Alarm In" or "Motion Detectoin", set to "OFF" in "Always  Send to Administrator
E-mail Address", add the Administrator E-mail address to "Mail-to Address"
and check one of "Send Conditoins."