Fujitsu C150-E049-02EN Manuale Utente
M3099GX/GH OEM Manual
A-5
ENDORSER
17 Press [Mode 2] once and press [Mode 1]
once. Place the document on the stacker.
Then press [START].
Then press [START].
NOTICE: The scanner prints the five digit numbers from the
initial number by the increment of one.
NOTICE: Before pressing [START], you can set document size,
resolution and so on. (See OPERATOR’S GUIDE)
A3.1 Replacing the print head
When “INK EMPTY” is displayed in LCD display, the operator is
responsible to change the print head as follows.
responsible to change the print head as follows.
1 Open and remove the endorser cover at
the rear top corner of the scanner. Power
of the scanner will turn off, if the power
is on at cover open.
of the scanner will turn off, if the power
is on at cover open.
2 Turn the print head lock lever up, then
replace the print head.
3 Attach the new print head in the endorser
and turn the print head lock lever back.
4 Close the endorser cover back.
A3. Print head
handling
Endorser cover
Print head
lock lever
lock lever
Print head
or