Fujitsu C150-E049-02EN Manuale Utente

<< SETUP MODE >>

SCSI-ID SET

Screen 24

SCSI-ID SET

5

Screen 25

<< SETUP MODE >>

PRODUCT-ID SET

PRODUCT-ID SET

X X X X X X

Screen 27

Screen 26

When you reset the number to the initial number, you must see Section
A2.4 of Appendix A.

When you reset the ink counter, you must see Section A2.5 of Appendix A.

When you set the SCSI-ID, you must set as follows.

31 At Screen 2, press [Mode 1] twelve times to

go to the SCSI-ID SET screen. (Screen 24)

32 Press [Mode 2] to see Screen 25. (The default

setting is “5”.)

33 At Screen 25, the SCSI-ID is from 0 to 7

each time you press [Mode 1].

34 Press [Mode 2] to see Screen 24. The settings

are stored to EEPROM.

35 When you close the setup mode, go to  9 .

When you set the Product-ID, you must set as follows.

36 At Screen 2, press [Mode 1] thirteen times to

go to the PRODUCT-ID SET screen.
(Screen 26)

37 Press [Mode 2] to see Screen 27. (The default

setting is “M3099GH” in case of M3099GH
and “M3099G” in case of M3099GX.)