Fujitsu C150-E049-02EN Manuale Utente

M3099GX/GH OEM Manual

B-12

When you set the picking time, you must set as follows.

f At Screen 2, press [Mode 1] fifteen times to

go to the PICK TIMER screen. (Screen 30)

g Press [Mode 2] to see Screen 31. (The default

setting is 2 sec.)

h At Screen 31, press [Mode 1] until the digit

you want to change blinks. Then press [Mode
2] until the digit changes as you want. (The
specifiable range is from 0.5 to 99.5 sec. in
0.5 sec. step.)

i Press [Mode 1] and [Mode 2] at a time to see

Screen 30. The settings are stored to
EEPROM.

j When you close the setup mode, go to 9.

When you set the time-out limit, you must set as follows.

k At Screen 2, press [Mode 1] sixteen times to

go to the TIME-OUT SET screen. (Screen
32)

l Press [Mode 2] to see Screen 33. (The default

setting is 30 sec.)

m At Screen 33, press [Mode 1] until the digit

you want to change blinks. Then press [Mode
2] until the digit changes as you want. (The
specifiable range is from 1 to 1999 sec. in 1
sec. step.)

n Press [Mode 1] and [Mode 2] at a time to see

Screen 32. The settings are stored to
EEPROM.

o When you close the setup mode, go to 9.

<< SETUP MODE >>

PICK TIMER

Screen 30

<< SETUP MODE >>

X X . X 

S

Screen 31

<< SETUP MODE >>

TIME-OUT SET

TIME-OUT SET

X X X X

S

Screen 33

Screen 32