Enterasys Networks X009-U Manuale Utente
Installing and Removing a Power Supply
Matrix X4-C Chassis Installation Guide 3-13
Figure 3-12 Removing Power Supply Vent Plate
6.
Locate the PS1 power supply slot, as shown in
.
7.
Hold the power supply by placing one hand on the handle located on the front panel and
using your other hand to support the power supply.
using your other hand to support the power supply.
8.
Position the power supply with captive screw to the right and align with the slot opening.
9.
With the power supply properly inserted into the opening, carefully slide the module until it
connects to the backplane, as shown in
connects to the backplane, as shown in
. The module’s handle should be nearly
flush with the face of the Matrix X4‐C chassis. If significant resistance is encountered before
the power supply is seated, remove and reinsert it. Do not force the module into place.
the power supply is seated, remove and reinsert it. Do not force the module into place.
1 Power supply slot (PS1)
2 Power supply coverplate
3 Vent plate
4 Captive screws (2)
Caution: Forcing a misaligned power supply into place can damage the power supply or chassis
backplane.
backplane.
Precaución: Colocar de manera forzada una fuente de poder o no colocarla bien alineada podría
dañarla y/o maltratar el panel posterior del chasis.
dañarla y/o maltratar el panel posterior del chasis.
FM2
FM1
S/N:
MAC ADD.
GROUND
STRAP
STRAP
CM2
CM1
4
3
2
1
FAN
TRAY
1
FAN
TRAY
2
X4
CM2
CM1
4
3
2
1
FAN
TRAY
Matrix
X4
FAN
TRAY
4
1
4
2
3