NEC 2400IMX Manuale Utente
NDA-24282
APPENDIX A
Page 453
Revision 1.0
APPENDIX A
GLOSSARY
ACD
Automatic Call Distribution.
ACDP
Automatic Call Distribution Processor. (For the NEAX2400 IMX, the ACDP is
built in the CPU of the PBX)
built in the CPU of the PBX)
ACD line
Virtual line of an ACD position.
ACD MAT
Maintenance Administration Terminal (MAT) on which the ACD commands are
loaded.
loaded.
After call mode
Selection of ACD position availability after ACD call completion. In Work mode,
an ACD position becomes unavailable to receive ACD calls upon release from the
previous ACD call. In Available mode, an ACD position becomes available to
receive ACD calls upon release from the previous call.
an ACD position becomes unavailable to receive ACD calls upon release from the
previous ACD call. In Available mode, an ACD position becomes available to
receive ACD calls upon release from the previous call.
Agent Personal Queue
Queues for calls that are directed to a specific ACD position.
Answer mode
Answer mode for ACD positions: either Auto or Manual. In Manual mode,
incoming calls ring at the position and are required to be answered manually. In
Auto mode, calls are connected using the headset or handset, and are introduced by
a Zip Tone.
incoming calls ring at the position and are required to be answered manually. In
Auto mode, calls are connected using the headset or handset, and are introduced by
a Zip Tone.
Auto Work mode
Occurs when the ACD position receives or places a call on the PBX line.
Call Control Vector (CCV)
A list of instructions or steps for handling incoming ACD calls.
Circuits
The number of trunks in a trunk group that are designated as ACD trunks.
Conditional threshold
Threshold values set for call acceptance of conditional queue calls into the queue
of a target split.
of a target split.
Default language
The language that will be shown on the display of an ACD position that is logged
onto the ACD system.
onto the ACD system.
Directory number
Night, Assist and Emergency destination programmed in split data (ACDSPL).
Do Not Disturb
Occurs when none of the ACD positions of an ACD split are logged on.
Hardware type
Specifies if the position is a D
term
or analog agent.
Holiday
A date designated as a holiday within the ACD system, subject to holiday call
handling procedures (see ACDHC and ACDHS).
handling procedures (see ACDHC and ACDHS).
I-ACD
Integrated ACD.
I/O type
Defines which type of MIS or Infolink will be used on the input/output port.
Infolink
A data communications link between the ACD system and external computer
equipment such as host and IVRs.
equipment such as host and IVRs.
Internal priority
Priority at which an internal call will be handled.
IVR
Interactive Voice Response unit. A voice prompting unit that can be guided
through menus via DTMF signalling.
through menus via DTMF signalling.
Language
Language to be used for ACD terminal display (D
term
).
Logon ID
ID code used to logon to the ACD system.