Honeywell 16103 Manuale Utente
7
S E T
S E T
S E T
S E T
S E T
123
123
123
123
123
GROUPS
GROUPS
GROUPS
GROUPS
GROUPS
SUU
SUU
SUU
SUU
SUU
Pressing the ent key will implement the status shown.
If a code, keyfob or tag is used while an entry timer is running or an alarm is in progress, the
group that is active will be unset immediately, without any status needing to be changed on the
keypad.
If a code, keyfob or tag is used while an entry timer is running or an alarm is in progress, the
group that is active will be unset immediately, without any status needing to be changed on the
keypad.
Menu Access
To access the other functions of the system, users can enter the menu mode by typing their
PIN code and pressing the ent button. This will display the first menu item after showing
system status for 5 seconds.
PIN code and pressing the ent button. This will display the first menu item after showing
system status for 5 seconds.
10 = Setting
10 = Setting
10 = Setting
10 = Setting
10 = Setting
[ent] to Select
[ent] to Select
[ent] to Select
[ent] to Select
[ent] to Select
Users can then navigate around the menu using the scroll keys, ent key and esc key, or they
can jump to any specific menu item directly by typing the number of the item. An overview of
all the accessible functions is shown below. Not all users will be able to access all of the
functions. This will depend on their ‘user type’ that is set up in menu 42.
can jump to any specific menu item directly by typing the number of the item. An overview of
all the accessible functions is shown below. Not all users will be able to access all of the
functions. This will depend on their ‘user type’ that is set up in menu 42.
Table 1. Menu Access
The function of each menu item is described in the following pages.
S = SET
U = UNSET
U = UNSET
Setting and Unsetting With Group Choice
With group choice, setting is initiated as normal, using a code, tag or fob. However, a choice of
groups will then be displayed along with the current status of each group.
The status can be changed for each group by pressing the appropriate number button and the
display will cycle through the possible options.
With group choice, setting is initiated as normal, using a code, tag or fob. However, a choice of
groups will then be displayed along with the current status of each group.
The status can be changed for each group by pressing the appropriate number button and the
display will cycle through the possible options.
10 = Setting
20 = Display
30 = Test
40 = Modify
11 = Omit Zones 21 = Zone Status
31 = Walk Test
41 = Time/Date
12 = Timed Set
22 = View Log
32 = Output Test
42 = Users
13 = Part Set
23 = System Version
44 = Mobile Nos
14 = Night Set
24 = Print
47 = Remote Access
15 = Chime
48 = Level 3 Access