Heath Zenith SL-5411-WH Manuale Utente

© 2007 HeathCo LLC 

598-1128-03

•  The light control requires 120-volts AC.
•  If you want to use Manual Mode, the control must be 

wired through a switch.

• 

•  This product is intended for use with the enclosed 

gasket and with a junction box marked for use in wet 
locations.

Model SL-5411

Light Control

•  Turns on lighting when motion is detected.
•  Automatically turns lighting off.
•  Photocell  keeps  the  lighting  off  during  daylight 

hours.

•  LED indicates motion was sensed (day or night).

Plastic Hanger

Rubber Plug

Gasket

6 Screws

(3 sizes included)

Mounting Strap

Mounting Bolt

2 Flood Lamps  

(some versions)

2 Wire

Connectors

This package includes:

As an ENERGY STAR

®

 Partner, Heath

®

/Zenith 

has determined that this product meets the EN-
ERGY STAR

®

 guidelines for energy efficiency. 

This product is ENERGY STAR

®

 compliant when 

used with 120 Watt bulbs.

* resets to Auto Mode at dawn.

Note:  When first turned on wait about 1 

1

/

2

 minutes for 

the circuitry to calibrate.

ON-TIME

10 5 1 TEST

10 5 1 

ON-TIME

... back on.

1 Second 

OFF then...

Put the ON-TIME switch in the 1, 5, 
or 10 minute position.

Put the ON-TIME switch on the bottom 
of the sensor in the TEST position.

Manual  mode  only  works  at  night 
because daylight returns the sensor 
to AUTO.

Flip the light switch off for one second 
then back on to toggle between AUTO 
and MANUAL MODE.

Manual  mode  works  only  with  the 
ON-TIME  switch  in  the  1,  5,  or  10 
position.

MANUAL MODE

AUTO

TEST

*  If you get confused while switching modes, turn the 

power off for one minute, then back on. After the cali-
bration time the control will be in the AUTO mode.

Mode:

On-Time

Works:

Day Night

5 Seconds

x

x

1, 5, or 10 Min

x

Until Dawn*

x