Bacharach H25-IR Manuale Utente

Maintenance

H25-IR

Instruction 3015-4342

7. From the C:\RFU folder, run the flash memory program by

double clicking the file rfu.exe.

8. Select Setup > Communications.

9. Under “Serial Options”, select Use Serial Connection. Then

set the Baud Rate to 115200, and select Enable Processor
Detection.

Note that COM1 is the default Comm Port. If necessary,
change the Comm Port to match the port that the instrument

was connected to in Step 2.

Click OK.

10. Select Setup > File Locations and verify that the coldload.bin,

pilot.bin, and flash.ini files are all located in the C:\RFU
folder.

Click OK if these files are in the correct folder. If necessary,
use the browse buttons in the Choose File Locations dialog

box to locate each of these files.