Teledyne t320u Manuale Utente

 

189 

 

This section provides information needed when using external digital and serial I/O for 
remote operation. It assumes that the electrical connections have been made as described 
in Section3.3.1. 

The T300 can be remotely configured, calibrated or queried for stored data through the 
rear panel serial ports, via either Computer mode (using a personal computer) or 
Interactive mode (using a terminal emulation program). 

Computer mode is used when the analyzer is connected to a computer with a dedicated 
interface program such as APICOM.  

8.1.1. REMOTE CONTROL VIA APICOM 

APICOM is an easy-to-use, yet powerful interface program that allows a user to access 
and control any of Teledyne API’s main line of ambient and stack-gas instruments from 
a remote connection through direct cable, modem or Ethernet. Running APICOM, a user 
can: 

  Establish a link from a remote location to the T300 through direct cable 

connection via RS-232 modem or Ethernet. 

  View the instrument’s front panel and remotely access all functions that could be 

accessed manually on the instrument. 

  Remotely edit system parameters and set points. 
  Download, view, graph and save data for predictive diagnostics or data analysis. 
  Retrieve, view, edit, save and upload DAS configurations (Section 7.2.1). 
  Check on system parameters for trouble-shooting and quality control. 

APICOM is very helpful for initial setup, data analysis, maintenance and 
troubleshooting. Refer to the APICOM manual available for download from 
http://www.teledyne-api.com/software/apicom/. 

06864B DCN6314