Dimplex DFG2562SS Manuale Utente

Pagina di 19
10  
www.dimplex.com
  
Installation 
Firebox Installation
Install the firebox in one of the 
following methods:
  Within a new or existing 
mantel.  refer to Figure 1 for  
minimum dimension requirements.
  Within a new wall 
construction.
New Wall Construction
  select a suitable location that 
is not susceptible to moisture and 
is away from drapes, furniture and 
high traffic.
  Place the fireplace in the 
desired location to see how it will 
look in the room.
  mark the desired location on 
the floor and store the fireplace in 
a safe, dry and dust free location.
  Use studs to frame an 
opening of 24 ½ inches (622 mm) 
wide X 18 ¼ inches (463.6 mm) 
high X 9 inches (229 mm) deep.
  Choose a wiring method:
Option #1 - The power cord can 
be led from behind the trim 
and  along the wall to an outlet 
near the fireplace.
Option #2 - A new outlet can be 
installed inside the new frame 
construction.  Plug the unit into 
a 15 Amp / 120 volt outlet.  If 
the cord does not reach, you 
may use an extension cord 
rated for a minimum of 1875 
Watts.
Option #3 - hardwire
  refer to hardwire installation  
  instructions on page 8.
Final Steps
Carefully pour and evenly 
distribute the supplied glass 
rock media on the front tray of 
the firebox (Figure 5).  once 
complete, hang the front glass 
assembly on the mounts of the 
firebox.
Figure 5
Front glass
Mounts
hooks