Dimplex DFG2562SS Manuale Utente

11

A. Three Position On/Off Switch
The switch has two on positions 

marked “ 

I ” and “ II ”. 

The “ 

I ” position is for manual 

operation. In this position the 

built-in remote control is by-

passed. 
The “ 

II ” position is for operating 

the unit with the provided remote 

control.  When in the remote 

control (“ 

II ”) position the unit is 

operated with the ON and OFF 

buttons of the remote control. 
When the switch is in the center  

“ 

O ” position the unit is off.

B. Heater On/Off Switch
The heater on/off switch 

supplies power to the heater fan  

and the heater element. When the 

switch is in the on position, the 

heater operates if the thermostat 

calls for heat.

C. Heater Thermostat Control
To adjust the temperature to your 

individual requirements, turn the 

thermostat control clockwise all 

the way to turn on the heater. 

When the room reaches the 

desired temperature, turn 

the thermostat knob counter-

clockwise until you hear a click. 

Leave in this position to maintain 

the room temperature at this 

setting. For additional heat, turn 

clockwise until you hear the click 

again and the heater will turn on.

should the heater overheat, an 

automatic cut out will turn the 

fireplace off and it will not come 

back on without being reset.  It 

can be reset by switching the 

Three Position on/off switch to 

off and waiting five (5) minutes 

before switching the unit back on.

C

b

A